|
Camera setup: Device ID 00606E8EB9CA Device Firmware Version 11.14.2.17 Device Embeded Web UI Version 2.4.8.14 Alarm Status None DDNS Status DynDns Succeed http://user.dyndns.org UPnP Status No Action IP Addr 192.168.1.105 DDNS Service http://DynDns.org(dyndns) DDNS User xxxxxxxxx DDNS Password *** DDNS Host http://user.dyndns.org =============================================================== Linksys setup (port forwarding): Application: ipcam Start: 80 End: 80 Protocol: TCP IP Address: 192.168.1.105 Enable: checked Unchecked "Block Anonymous Internet Requests" under Security Checked "Filter Multicast" under Security Unchecked "Filter Internet NAT Redirection" (Followed instructions from http://Portforward.com) Local IP address: 192.168.1.1 Subnet mask: 255.255.255.0 DHCP server: Enable Starting IP address: 192.168.1.100 DDNS Service: Disable External IP address: 74.204.125.138 (WhatIsMyIPAddress.com) =============================================================== DynDns setup: Hostname: http://user.dyndns.org Service type: Host with IP address IP address: 74.204.125.138 ================================================================ Installed and ran DynDNS Updater (applied) Ran DNSCog and the IP address is OK (coincides with the entered IP address on DynDns setup) ================================================================ Camera running and visible from other computers in the network. ================================================================ PROBLEM: An attempted connection to 74.204.125.138:80 was refused. This typically indicates that there are no services available on that port, but that it is NOT being blocked by a firewall or your ISP. Of course, I can not see the ipcam. |
|
Do you have any other routers or modems? Does the Linksys have the I'd recommend 2 things:
|
|
I have only one router. I do not know if my router's ip address is 74.204.125.138. That is what I get when I use http://checkip.dyndns.com. The update client of the router is disabled (do you mean the DDNS service?). I only have the DDNS service settings on the ip camera (with fixed ip address 192.168.1.105). However, when I try to configure DDNS on the router, it says that the Internet IP Address is 10.72.142.36. I also tried different ports: 8080, 9090, but I receive the same message. When I enter the ip address 10.72.142.36 with port 80 (or 8080) in the Open Port Tool, I get the following message: An attempted connection to 10.72.142.36:80 timed out. This typically indicates that traffic to that port is being actively blocked by either a firewall or your ISP. which is different from the one I get when using the IP address 74.204.125.138 which reads (port 8080 gives the same answer): An attempted connection to 74.204.125.138:80 was refused. This typically indicates that there are no services available on that port, but that it is NOT being blocked by a firewall or your ISP Thank you. |
|
If you log in to your router, what IP address does it show against it's WAN interface? |
|
This is the info from the Status page: Firmware Version: v1.02.6 build 005, Jun. 16, 2008 Login Type: Automatic Configuration - DHCP |
1 2 next page »
This question has been inactive for a month with no accepted answer. Closing it off as no longer relevant.